Is immediate dentin sealing a mandatory or optional clinical step for indirect restorations?

OBJECTIVE: The use of immediate dentin sealing (IDS) following tooth preparation for indirect restorations is well-supported by laboratory studies. The inclusion of IDS as a mandatory clinical step, it must be firmly supported by evidence from randomized clinical trials (RCT). The objective of this study is to assess whether IDS should be added as a mandatory procedure in all indirect restorations, taking into consideration clinically significant outcomes for the patient, such as restoration longevity and hypersensitivity. MATERIALS AND METHODS: A bibliographic search was carried out in the PubMed. In addition, a manual search was conducted in the references of literature reviews. RESULTS: Data from four RCT were included. Two studies assessed preparations for full crowns, and two assessed preparations for partial restorations. Data from full crown preparations were subjected to a meta-analysis, revealing a reduction in hypersensitivity incidence in the IDS group 1 week after restoration cementation. With respect to hypersensitivity, IDS seems to offer advantages exclusively during the provisional phase and up to 1 week following the cementation of the final restoration. One study has shown no difference on longevity. CONCLUSION: The use of IDS should be considered as an elective clinical step during the rehabilitation with indirect restorations. CLINICAL SIGNIFICANCE: IDS is an elective clinical step that should be considered in patients and preparations with a higher risk of sensitivity between appointments.

Experiências e percepções de discentes e docentes de odontologia sobre as aulas remotas durante a pandemia de COVID-19 / Experiences and perception of dentistry students and professors regarding online classes during the COVID-19 pandemic

O presente estudo objetivoudescrever a percepção de docentes e discentes de Odontologia sobre as atividades desenvolvidas nos ambientes virtuaisde aprendizagemdurante o período de isolamento social. Professores e estudantes dequatro cursosde Odontologia foram convidados a responderaum questionário autoaplicável, contendo questões objetivas e subjetivas arespeito de suas experiências e sensações em relação às atividades.Tanto docentes quanto discentes consideram que o aprendizado nesse período foi inferior ao presencial, contudo, concordam com a manutenção das aulas virtuais durante o período da pandemia (AU).

The present study aimed to describe the perception of Dentistry professors and students regarding the activities developed in virtual environments during the period of social isolation. Through self-administered questionnaires, professors and students from four Dentistry courses were invited to answer objective and subjective questions about their experiences and sensations during the period. Both professors and students consider that the learning in this period was inferior to the face-to-face, however, they agree with the maintenance of the virtual classes during the pandemic period (AU).

Influência do polimento na estabilidade de cor de uma resina composta após imersão em diferentes substâncias corantes / Influence of polishing on color stability of a composite resin after immersion in different coloring substances

Objetivo: Avaliar o grau de pigmentação da resina composta imersa em água destilada, molho shoyu e vinho tinto, submetida a diferentes métodos de polimento. Método: Foram confeccionadas 90 espécimes de resina composta cor A2 esmalte (4 mm de diâmetro de topo, 3 mm de diâmetro de fundo e 2 mm de espessura), divididos igualmente em três grupos, de acordo com o tratamento superficial realizado (sem polimento, polimento com Diamond Pro e polimento com lixa). As 30 amostras de cada grupo foram divididas em três subgrupos (n=10) e imersas em diferentes soluções (água, molho shoyu e vinho tinto). A análise colorimétrica foi realizada previamente, 7 e 15 dias após a imersão das amostras nas soluções, com o auxílio de um colorímetro. Os dados foram submetidos aos testes de ANOVA/Tukey considerando um nível de significância de 5%. Resultados: Amostras imersas em água apresentaram pequena variação de cor (E=2,2), com exceção das que não receberam polimento (E=7,8). O vinho tinto apresentou significativo maior potencial de pigmentação (E=15), independente do método de polimento, enquanto o molho shoyu (E=11) demonstrou pigmentar com maior intensidade as amostras polidas com discos de lixa. Conclusões: É necessário fazer um acabamento e um polimento adequado na restauração de resina composta para que o grau de pigmentação seja o menor possível. Sobre os alimentos corantes, conclui-se que tanto o molho shoyu quanto o vinho tinto pigmentam a resina composta, porém o vinho pigmenta com uma intensidade maior(AU)

Objective: To evaluate the degree of pigmentation of composite resin immersed in distilled water, shoyu sauce and red wine, with different polishing methods. Method: 90 specimens of A2 enamel composite resin (4 mm of top diameter, 3 mm of bottom diameter and 2 mm of thickness) were made, equally divided into three groups, according to the surface treatment carried out (without polishing, polishing with Diamond Pro and polishing with sandpaper). The 30 samples from each group were divided into three subgroups (n = 10) and immersed in different solutions (water, shoyu sauce and red wine). The colorimetric analysis was performed previously, 7 and 15 days after the samples immersion in the solutions, with the aid of a colorimeter. The data were submitted to ANOVA/Tukey tests considering a significance level of 5%. Results: Samples immersed in water showed little color variation (E = 2.2), with the exception of those that did not receive polishing (E = 7.8). Red wine showed a significant higher pigmentation potential (E = 15), regardless of the polishing method, while shoyu sauce (E = 11) demonstrated to pigment the polished samples with sandpaper with greater intensity. Conclusion: It is necessary to finish and polish the composite resin properly so that the degree of pigmentation is as low as possible. Regarding coloring foods, it is concluded that both shoyu sauce and red wine pigment the composite resin, but the wine pigments with greater intensity(AU)

Antimicrobial effect of photodynamic therapy on intracanal biofilm: A systematic review of in vitro studies.

BACKGROUND: Antimicrobial photodynamic therapy (A-PDT), is one of the adjunctive therapies developed to improve the effectiveness of root canal disinfection.. The aim of this study was to analyze the antimicrobial effect of PDT on intracanal biofilm. METHODS: Two reviewers conducted a literature search in PubMed, MEDLINE, Lilacs, SciELO, EMBASE and Google Scholar using the following search strategy: photochemotherapy "[Mesh] OR (photodynamic therapy) AND" dental plaque "[Mesh] OR (dental biofilm) AND (root canal). The following data were collected: publication year, author's name, study site, type of study, participant number, type of photosensitizer, type of laser, method of data collection, application time and results. Study quality was assessed using the Methodological Index for Non-Randomized Studies (MINORS). RESULTS: After selection based on title, abstract and full text, 27 studies were included in this systematic review. PDT reduced bacterial viability in most studies when combined with conventional endodontic techniques. CONCLUSION: PDT reduced bacterial counts in most studies, especially when used as an adjunct to the conventional endodontic technique to treat refractory infection. However, PDT effects on in vitro bacterial biofilm were not accurately quantified because of the numerous biases in the studies reviewed.

Effect of heat treatment on cytotoxicity and polymerization of universal adhesives.

To assess, in vitro, the influence of heat air treatment on cytotoxicity and degree of conversion (DC) of universal self-etch adhesives (Ambar Universal APS, Scotchbond Universal Adhesive, and Tetric N-Bond Universal) in an NIH/3T3 fibroblast cell culture. Samples were divided into three groups: 1) no heat treatment (control), 2) 37°C and 3) 60°C heat treatment before photopolymerization. Cytotoxicity was analyzed by MTT assay and the DC by FTIR. All adhesives heated at 60°C showed reduced cytotoxicity levels when compared with those heated at 37°C. In general, DC of Ambar Universal APS presented the highest DC than Scotchbond Universal Adhesive and Tetric N-Bond Universal, and the hot air treatment do not influence the conversion. Heat treatment at 60°C was able to reduce the cytotoxicity of universal self-etch adhesives, even, the heat treatment does not enhances the DC.

Hot air stream reduces cytotoxicity of light-cured calcium hydroxide based cements.

BACKGROUND: The light-cured calcium hydroxide based cements have incomplete polymerization and unconverted monomers can cause pulp cell damage. The aim of this study was to evaluate the influence of a warm and hot air stream on the cytotoxicity of light-cured calcium hydroxide based cements. MATERIAL AND METHODS: The materials Dycal (conventional cement), Biocal, Hidrox-Cal, and Ultra-Blend Plus (light-cured calcium hydroxide cements) were submitted to cytotoxicity analysis after polymerization, without vs. with previous heat treatment with a warm (37°C) and a hot (60°C) air stream. Following polymerization, cements were maintained in culture medium for 24 hours and 7 days, and subjected to the MTT test. Data were analyzed using analysis of variance (ANOVA) followed by post-hoc Student-Newman-Keuls (<0.05). RESULTS: The results indicated significant differences between the materials according to their composition, i.e., light-cured cements treated with a jet of warm air showed similar cytotoxicity levels to those observed for conventional cement, suggesting that they may be considered alternatives in cases requiring pulp-capping treatment. CONCLUSIONS: Application of a hot air stream reduced cytotoxicity of materials tested. Key words:Dental pulp capping, dental cements, calcium hydroxide, cell survival.

Evaluation of Tensile Bond Strength of Metallic Prefabricated Posts Cemented with Different Luting Agents

Abstract Objective: To assess the tensile bond strength of prefabricated metal posts cemented with different luting agents. Material and Methods: Fifty single-rooted endodontically treated human teeth had their crowns cut, mounted into acrylic-resin blocks and then an 8mm depth post space were prepared. Prefabricated cylindrical metal posts were cemented using different luting agents: a zinc phosphate cement (SS White), a conventional glass ionomer cement (Vidrion C), two resin-modified glass ionomer cements (Vitremer and RelyX Luting 2) and a resin cement (RelyX ARC). Samples were stored in distilled water for seven days and then submitted to a tensile bond strength test until complete dislocation of the post. One-way analysis of variance and Tukey test for pairwise multiple comparisons were used to evaluate differences between luting agents. Results: Tensile bond strength was 563.88±203.41 N for zinc phosphate cement, 336.86 ± 137.64 N for Vidrion C, 515.24 ± 239.48 N for Vitremer, 828.47±433.99 N for RelyX Luting 2 and 1262.51 ± 356.29 for RelyX ARC. The Relyx ARC presented the highest tensile bond strength regard the luting agent tested (p< 0.05). Conclusion: RelyX ARC presented the higher tensile bond strength compared to the other luting agents evaluated.

Longevity and marginal bone loss of narrow-diameter implants supporting single crowns: A systematic review.

PURPOSE: To compare the longevity and marginal bone loss of narrow-diameter (≤3.3-mm) versus standard-diameter implants supporting single crowns. MATERIAL AND METHODS: The MEDLINE (via PubMed), Scopus, and SciELO databases were searched for relevant publications. In addition, the scientific references provided by each of the implant companies that appeared in the search were reviewed. Intervention studies comparing longevity and bone loss between narrow-diameter and standard-diameter implants were included. RESULTS: The search was limited to in vivo studies in humans. The query returned 1931 results, of which 4 met the inclusion criteria. The implant success rate ranged from 93.8% to 100% over a maximum follow-up of 3 years, with no difference between narrow- and standard-diameter implants. Meta-analysis of all included studies showed greater bone loss in narrow-diameter implants as compared with standard ones; however, when analysis was restricted to randomized trials, no such difference was present. CONCLUSION: The meta-analysis showed no difference in longevity between narrow implants and standard implants when supporting single crowns. However, narrow-diameter implants may be associated with greater marginal bone loss. These findings should be regarded cautiously due to the short follow-up duration and methodological heterogeneity of the primary studies.

Serious game is an effective learning method for primary health care education of medical students: A randomized controlled trial.

OBJECTIVE: The aim of this study was to compare the influence of a serious game dedicated to primary health care with traditional learning methods on knowledge of undergraduate medical students. METHODS: A randomized controlled trial was conducted with undergraduate medical students. The students (n = 27) attended to an expositive leveling lesson regard the theme "Screening on Primary Health Care", and answered to a baseline knowledge test, comprised by objective questions. Students were randomly allocated to the control and game groups, in which received a text-based material regarding "Screening on Primary Health Care" or were exposed to a serious game. An immediate knowledge test and a retention knowledge test, presenting the same questions of baseline test, were responded by students at the finish of exposure and four weeks later. The students also performed a survey evaluating the user experience on the serious game. Knowledge test scores were analysed by repeated measures ANOVA and paired sample t-test. User experience and expectation surveys were descriptively analyzed. RESULTS: For the control group, the mean scores and standard deviation were 7.85 ±â€¯0.99, 9.00 ±â€¯1.87 and 7.69 ±â€¯1.44 for baseline, immediate and retention knowledge tests, respectively; the score at immediate test was higher than for baseline and retention tests. The game group presented 7.07 ±â€¯1.98, 8.00 ±â€¯1.84 and 7.15 ±â€¯1.41 for baseline, immediate and retention knowledge tests, respectively. The comparison between groups did not show differences at any moment (p < 0.05). The majority of the participants consider that the serious game has understandable instructions, presented the contents clearly, and it favors the engagement on study. CONCLUSION: The serious game was effective to improve the students' knowledge on primary health care contents. Learning based on a serious game is as effective as learning based on printed text.

Restaurações Biológicas como Alternativa para Reabilitação de Dentes com Extensa Destruição Coronária / Biological Restoration as an Alternative to Rehabilitation of Extensively Compromised Teeth

Objetivo: Descrever reabilitações com coroas biológicas por meio de dois casos clínicos, um dente anterior e um posterior. Material e Método: O estudo apresenta dois casos clínicos em que reabilitações de dentes extensamente destruídos foram realizadas. Em um dos casos é apresentada a reabilitação do dente 14 e no seguinte uma reabilitação simultânea dos dentes 21 e 22. Em ambos os casos foram utilizados dentes humanos provenientes de um banco de dentes humanos (BDH). Para a seleção dos dentes, utilizou-se como parâmetros os diâmetros dos dentes a serem reabilitados, bem como as medidas do dente homólogo contralateral. Os dentes obtidos junto a BDH foram seccionados, a coroa biológica esvaziada e então reembasada com resina composta sobre um modelo de gesso obtido dos pacientes. Após o reembasamento e ajustes oclusais ainda no modelo de gesso, as coroas foram cimentadas com cimento resinoso. Resultados: Em ambos os casos clínicos, os pacientes foram reabilitados adequadamente, de forma rápida e com custo reduzido. Conclusão: Restaurações biológicas podem ser utilizadas para reabilitação de dentes permanentes anteriores e posteriores; além de estimular o correto descarte de futuros dentes extraídos, sendo esses destinados a bancos de dentes humanos.

Objective: To describe rehabilitations with biological crowns by two clinical cases, one anterior and one posterior. Methods: The study presents two clinical cases in which extensively damage teeth were rehabilitated. In one, the rehabilitation of tooth 14 is presented and, in the other, a simultaneous rehabilitation of teeth 21 and 22 was performed. In both cases, human teeth from a human tooth bank (HTB) were used. For teeth selection, the diameters of the teeth to be rehabilitated, as well as, the measurements of the contralateral homologous tooth were used as parameters. The teeth obtained with HTB were sectioned, the biological crown emptied and then relined with composite resin on cast obtained from the patients. After the reline and occlusal adjustments, the crowns were cemented with resin cement. Results: The patients were rehabilitated properly, quickly and with reduced cost. Conclusion: Biological restorations can be used for rehabilitation of anterior and posterior permanent teeth; besides to stimulate the correct discard of extracted teeth, being these destined to human teeth banks.

Calcium phosphates as fillers for methacrylate-based sealer.

OBJECTIVES: The aim of this study was to evaluate the mineral deposition, push-out bond strength, radiopacity, the degree of conversion, film thickness, flow, calcium ion release, and pH of experimental endodontic sealers containing hydroxyapatite (HAp), aflfa-ticalcium phosphate (α-TCP), or octacalcium phosphate (OCP) particles. MATERIALS AND METHODS: Fifty single straight root human premolars were instrumented and divided into five groups (n = 10). Experimental endodontic sealers were formulated by 70 wt% urethane dimethacrylate (UDMA), 15 wt% of glycerol-1,3-dimethacrylate (GDMA), 15 wt% of ethoxylated bisphenol A glycol dimethacrylate (BISEMA), camphorquinone (CQ), N,N-dihydroxyethyl-para-toluidine (DHEPT), and benzoyl-peroxide. 10 wt% of each HAp, α-TCP, or OCP were added to the resin and its properties were assessed. RESULTS: After 7 days, the degree of conversion ranged from 44.69% (GOCP) to 50.74% (Gcontrol) and no statistical difference were observed (p < 0.05). GAHplus showed the highest push-out bond strength 4.91 (± 2.38) MPa at 28 days of analysis (p < 0.05). Film thickness and pH were not statistically different (p > 0.05). Statically lower values of flow were found for GHAp, GOCP, and Gα-TCP (p < 0.05). Calcium deposition values were higher for GHAp at 28 days. CONCLUSIONS: Bond strength, degree of conversion, and film thickness of endodontic sealers with phosphates showed similar results compared with AHplus, but displayed higher amounts of Ca2+ release. CLINICAL RELEVANCE: Phosphate fillers improve the performance of endodontic sealers after 28 days of simulated body fluid.

Restauração de dentes tratados endodonticamente com resinas bulk-fill: revisão integrativa / Endodontically treated teeth restored with bulk-fill resins: integrative review

Objetivo: realizar uma revisão de literatura sobre o uso de resinas bulk-fill para restaurar dentes tratados endodonticamente. Materiais e método: a busca dos estudos, clínicos ou laboratoriais, foi realizada no portal PubMed, utilizando os descritores "bulk fill" e "endodontically treated". Os dados extraídos da literatura foram agrupados em um quadro, que apresenta as características metodológicas e os principais resultados de cada estudo. Resultados: Sete estudos foram incluídos na revisão. Dentre eles, cinco avaliaram a resistência à fratura dos dentes após a restauração, um avaliou a adaptação da resina ao assoalho da câmara pulpar, e um realizou um ensaio clínico com acompanhamento de três anos, comparando o uso de resina bulk-fill com resina convencional. Considerações finais: o desempenho das resinas bulk-fill mostrou-se semelhante ao das resinas convencionais nas características de resistência à fratura dos dentes (in vitro) e longevidade (in vivo). A economia de tempo clínico proporcionada pelas resinas bulk-fill pode justificar o seu emprego para a restauração de dentes tratados endodonticamente. (AU)

Objective: the aim of this study was to review the literature regarding the use of bulk-fill resin to restore endodontically treated teeth. Materials and method: the search was performed at PubMed, using the descriptors "bulk fill" AND "endodontically treated". Clinical and laboratorial studies were included. The extracted data was presented on a table showing the methodological features and results of each study. Results: seven studies evaluated the bulk-fill resin on direct restoration. Five of these seven evaluated the resistance to fracture, one assessed the resin adaptation to the floor chamber, and one was a randomized clinical trial comparing the bulkfill resin to conventional resin. Final considerations: the performance of bulk-fill resins was similar to the conventional resins when compared to the in vitro studies on tooth fracture resistance and in vivo study on longevity of restorations. The economy of clinical time may justify its use to restore endodontically treated teeth. (AU)

Masticatory satisfaction, ability, and performance in partially dentate patients after periodontal therapy / Satisfação, capacidade e performance mastigatória em pacientes parcialmente dentados após terapia periodontal

Introduction: Understanding the effects of periodontal therapy is essential in performance and satisfaction of partially dentate patients. Objective: To assess the effect of subgingival periodontal treatment in performance and masticatory satisfaction and ability as reported by partially dentate patients with untreated chronic periodontitis. Materials and method: Patients were given nonsurgical periodontal treatment and masticatory satisfaction, ability, and performance were evaluated before and after treatment. Performance was assessed based on sieving chewed standardized chewable material, while satisfaction and ability were analyzed using a questionnaire based on OHIP-EDENT. Result: Mean numbers of functional tooth units were 10.36 ± 1.43 anterior and 6.73 ± 0.79 posterior teeth. Masticatory performance did not vary significantly (p = 0.075), and mean particle sizes before and after treatment were 4.23 ± 1.84 mm and 3.90 ± 0.75 mm, respectively. Overall satisfaction and ability scores after treatment were higher (p > 0.05) compared with scores prior to the periodontal intervention. Conclusion: Periodontal treatment improves masticatory satisfaction and ability with no effect on performance.

Introdução: Entender os efeitos da terapia periodontal é fator essencial no desempenho e satisfação de pacientes parcialmente dentados. Objetivo: Avaliar o efeito do tratamento periodontal subgengival na performance ao mastigar e na satisfação e capacidade mastigatória auto-reportadas em pacientes parcialmente dentados. Material e método: Pacientes parcialmente dentados com periodontite crônica não tratada (n=11) receberam tratamento periodontal não-cirúrgico e tiveram a sua satisfação, capacidade e performance mastigatória aferidas antes e após o tratamento. A performance mastigatória foi aferida objetivamente pelo método da peneiragem de um alimento simulado após mastigação seguida da medição do tamanho das partículas. Resultado: A satisfação e a capacidade mastigatória foram mensuradas a partir de um questionário com base no OHIP-EDENT. O número médio de unidades funcionais anteriores foi de 10,36 ± 1,43 e posteriores de 6,73 ± 0,79, sem alterações após o tratamento. A performance mastigatória não apresentou diferença (p = 0,075) (tamanhos de partícula 4,23 ± 1,84 mm e 3,90 ± 0,75 mm antes e após o tratamento periodontal, respectivamente). A satisfação e a capacidade mastigatória apresentaram valores após o tratamento periodontal superiores (p > 0,05) em comparação aos valores prévios aos tratamentos. Conclusão: O tratamento periodontal, considerando a manutenção dos pares funcionais do início do tratamento, promove uma melhoria na satisfação e capacidade mastigatória auto-reportadas, sem afetar a performance mastigatória.

Methacrylate-based root canal sealer containing chlorexidine and α-tricalcium phosphate.

The aim of this study was to develop and to characterize a methacrylate-based root canal sealer containing chlorhexidine (CHX) and α-tricalcium phosphate (α-TCP). Experimental dual cure methacrylate-based sealer was produced containing 0, 2.5, or 5 wt% of CHX and 0, 25, or 50 wt% of α-TCP. Experimental sealers were evaluated based on flow, film thickness, radiopacity, degree of conversion (DC), degradation in water, pH and antibacterial activity. Flow ranged from 15.09 ± 0.11 to 17.47 ± 0.42 mm. All groups presented mean film thickness lower than 50 µm and had radiopacity equivalent to 3 mmAl. DC was higher than 60% for all compositions. The weight loss (WL) ranged 0.12-3.47%. The groups containing 5% of CHX presented the highest WL and the lower pH values after 28 days of water immersion. All chlorexidine-compositions exhibited antibacterial efficacy against Enterococcus faecalis on direct contact and agar diffusion tests. CHX and α-TCP addition at an experimental methacrylate-based root canal sealer influenced the physicochemical properties and provided antibacterial properties. The incorporation of CHX and α-TCP could be an alternative to antibacterial sealers with potential to improve periapical healing in endodontic treatments. © 2017 Wiley Periodicals, Inc. J Biomater Res Part B: 106B: 1439-1443, 2018.

Regionalização dos conteúdos de um curso de especialização em Saúde da Família, a distância: experiência da Universidade Aberta do Sistema Único de Saúde (UNA-SUS/UFCSPA) em Porto Alegre, Brasil / Regionalization of contents of an e-learning Family Health graduate course: the Open University of Brazilian National Health System experience (UNA-SUS/FCSPA), Porto Alegre, Brazil / Regionalización de contenidos de un curso de especialización en Salud de la Familia, a distancia: la experiencia de la Universidad Abierta del Sistema Brasileño de Salud (UNA-SUS/FCSPA) en Porto Alegre, Brasil

O objetivo desse estudo foi descrever o processo de criação dos conteúdos do Curso de Especialização em Saúde da Família (EspSF) promovido pela UNA-SUS/UFCSPA, modalidade a distância, de acordo com características de cada região onde o curso é ofertado. Parte do curso de EspSF é baseada na aprendizagem a partir de casos clínicos complexos. Alguns casos clínicos do curso foram personalizados de acordo com a região do país (norte, nordeste ou sul) onde o profissional atua, considerando características epidemiológicas e socioculturais de cada região. Com a adaptação de 12 casos complexos às realidades dos estados do Pará e de Sergipe, o curso, que foi inicialmente pensado a partir de características do estado do Rio Grande do Sul, pode ser oferecido aos referidos estados, mantendo a sua característica de fidedignidade às situações, as quais o profissional está exposto no seu cotidiano.(AU)

The objective of this study was to describe the process of creating the contents of the e-learning Family Health graduate course, promoted by the Open University of the Brazilian National Health System/Federal University of Porto Alegre (UNA-SUS/UFCSPA), adapted to the characteristics of each region where the course is offered. Part of this course is based on learning from complex clinical cases. Some clinical cases have been customized according to the regions of the country (North, Northeast and South) where participants exert their activities, considering epidemiological and socio-cultural characteristics of each region. Through the adaptation of 12 complex cases to the realities of the states of Pará and Sergipe, the course, although initially designed regarding the state characteristics of Rio Grande do Sul, can now be offered to those states while maintaining its characteristic of being in compliance with situations that workers experience in their daily lives.(AU)

El objetivo del estudio fue describir el proceso de creación de los contenidos del Curso de Especialización en Salud de la Familia (EspSF) promovidopor Universidad Abierta del Sistema Brasileño de Salud/Universidad Federal de Ciencias de la Salud de Porto Alegre (UNA-SUS/UFCSPA), modalidad a distancia, de acuerdo con características de cada región en donde se ofrece el curso. Parte del curso de EspSF se basa en el aprendizaje a partir de casos clínicos complejos. Algunos casos clínicos del curso se personalizaron de acuerdo con la región del país (norte, nordeste o sur) en donde actúa el profesional, considerando características epidemiológicas y socio-culturales de cada región. Con la adaptación de 12 casos complejos a las realidades de los estados de Pará y Sergipe, el curso que fue inicialmente pensado a partir de características del estado de Río Grande do Sul pudo ofrecerse a los referidos estados, manteniendo su característica de fidelidad a las situaciones a las que el profesional está expuesto en su cotidiano.(AU)

Efeito do ácido peracético sobre a adesão microbiana e as propriedades de tubos endotraqueais

Objetivo: avaliar a influência do número de imersões em ácido peracético na colonização bacteriana, na composição química, na rugosidade e na capacidade de recuperação após a deformação de tubos endotraqueais. Materiais e método: quatro tubos foram sub-metidos a sucessivas imersões em ácido peracético, constituindo quatro grupos: um controle (esterilizado pelo fabricante) e outros submetidos a uma, duas ou três imersões, de forma a simular o reprocessamento dos tubos. Os ensaios realizados foram: espectroscopia de infravermelho, rugosidade superficial, deformação da luz do tubo após compressão e colonização por Staphylococcus aureus. Resultados: o número de imersões (reprocessamento) não influenciou a colonização dos tubos por Staphylococcus aureus (p = 0,235), nem a composição química, nem a rugosidade (p = 0,621). Além disso, não houve diferença na capacidade do tubo em recuperar-se após deformação (p = 0,633). Conclusão: o reprocessamento por até três vezes não traz prejuízo às propriedades do material e não aumenta a colonização bacteriana na superfície dos tubos.

Glycerol Salicylate-based Pulp-Capping Material Containing Portland Cement.

The purpose of this study was to evaluate the water sorption, solubility, pH and ability to diffuse into dentin of a glycerol salicylate-based, pulp-capping cement in comparison to a conventional calcium hydroxide-based pulp capping material (Hydcal). An experimental cement was developed containing 60% glycerol salicylate resin, 10% methyl salicylate, 25% calcium hydroxide and 5% Portland cement. Water sorption and solubility were determined based on mass changes in the samples before and after the immersion in distilled water for 7 days. Material discs were stored in distilled water for 24 h, 7 days and 28 days, and a digital pHmeter was used to measure the pH of water. The cement's ability to diffuse into bovine dentin was assessed by Raman spectroscopy. The glycerol salicylate-based cement presented higher water sorption and lower solubility than Hydcal. The pH of water used to store the samples increased for both cements, reaching 12.59 ± 0.06 and 12.54 ± 0.05 after 7 days, for Hydcal and glycerol salicylate-based cements, respectively. Both cements were able to turn alkaline the medium at 24 h and sustain its alkalinity after 28 days. Hydcal exhibited an intense diffusion into dentin up to 40 µm deep, and the glycerol salicylate-based cement penetrated 20 µm. The experimental glycerol salicylate-based cement presents good sorption, solubility, ability to alkalize the surrounding tissues and diffusion into dentin to be used as pulp capping material.

Glycerol Salicylate-based Pulp-Capping Material Containing Portland Cement

The purpose of this study was to evaluate the water sorption, solubility, pH and ability to diffuse into dentin of a glycerol salicylate-based, pulp-capping cement in comparison to a conventional calcium hydroxide-based pulp capping material (Hydcal). An experimental cement was developed containing 60% glycerol salicylate resin, 10% methyl salicylate, 25% calcium hydroxide and 5% Portland cement. Water sorption and solubility were determined based on mass changes in the samples before and after the immersion in distilled water for 7 days. Material discs were stored in distilled water for 24 h, 7 days and 28 days, and a digital pHmeter was used to measure the pH of water. The cement's ability to diffuse into bovine dentin was assessed by Raman spectroscopy. The glycerol salicylate-based cement presented higher water sorption and lower solubility than Hydcal. The pH of water used to store the samples increased for both cements, reaching 12.59±0.06 and 12.54±0.05 after 7 days, for Hydcal and glycerol salicylate-based cements, respectively. Both cements were able to turn alkaline the medium at 24 h and sustain its alkalinity after 28 days. Hydcal exhibited an intense diffusion into dentin up to 40 µm deep, and the glycerol salicylate-based cement penetrated 20 µm. The experimental glycerol salicylate-based cement presents good sorption, solubility, ability to alkalize the surrounding tissues and diffusion into dentin to be used as pulp capping material.

O objetivo deste estudo foi avaliar a sorção e solubilidade em água, pH e habilidade de difusão na dentina de um cimento para capeamento pulpar à base de glicerol salicilato e compará-lo a um cimento comercial para capeamento pulpar à base de hidróxido de cálcio (Hydcal). Um cimento experimental contendo 60% de resina de glicerol salicilato, 10% de salicilato de metila, 25% de hidróxido de cálcio e 5% de cimento Portland foi formulado. Sorção e solubilidade em água foram determinadas a partir da alteração na massa de espécimes antes e após a imersão em água destilada por 7 dias. Discos dos cimentos foram armazenados em água destilada por 24h, 7 dias e 28 dias e o pH da água foi aferido após cada período. A habilidade de difundir-se no interior de dentina bovina foi avaliada por espectroscopia Raman. O cimento à base de glicerol salicilato apresentou maior sorção e menor solubilidade em comparação com o Hydcal. O pH da água de armazenamento dos espécimes aumentou para ambos os cimentos, chegando a 12,59±0,06 e 12,54±0,05 após 7 dias, para o Hydcal e o cimento à base de glicerol salicilato, respectivamente. Os cimentos foram capazes de promover a alcalinização do meio após 24h e sustentaram a alcalinidade após 28 dias. Hydcal exibiu intensa difusão na dentina até 40 μm de profundidade e o cimento à base de glicerol salicilato penetrou 20 μm. O cimento experimental à base de glicerol salicilato apresentou adequada sorção, solubilidade, habilidade de alcalinizar o meio e difundir-se no interior da dentina para uso como um material para capeamento pulpar.

Cimento experimental bioativo à base de glicerol salicilato contendo α -fosfato tricálcico para uso endodôntico / Bioactive cement experimental glycerol based salicylate containing α tricalcium phosphate for endodontic use

O tratamento de canal ideal compreende a desinfecção e selamento do sistema de canais radiculares, de forma a impedir a reinfecção e permitir o reparo dos tecidos periapicais. Para isso é necessário o emprego de materiais que promovam um perfeito selamento, o que até o presente momento não foi completamente alcançado. O objetivo do presente estudo in vitro foi desenvolver um cimento endodôntico à base de resina de glicerol salicilato e α-fosfato tricálcico (αTCP), que apresente potencial de estimular a deposição mineral. Os cimentos foram formulados a partir de 70% em massa de uma resina de glicerol salicilato, obtida a partir da reação de transesterificação do salicilato de metila com o glicerol, e 30% em massa de carga inorgânica, composta de hidróxido de cálcio e αTCP, em diferentes proporções: 30% Ca(OH)2, 25% Ca(OH)2 + 5% αTCP, 20% Ca(OH)2 + 10% αTCP, 15% Ca(OH)2 + 15% αTCP. A resina sintetizada foi caracterizada por cromatografia de exclusão por tamanho, ressonância magnética de prótons e espectroscopia Raman. Os cimentos foram caracterizados quanto ao tempo de presa, degradação in vitro, potencial de alcalinização do meio, citotoxicidade e capacidade de estimular a deposição mineral. A resina de glicerol salicilato foi obtida por meio da reação de transesterificação, com 72% de rendimento. Os grupos avaliados apresentaram um tempo de presa de 240 min a 405 min e capacidade de alcalinizar o meio...

Dental root canal treatment comprises the disinfection and complete filling of root canals in order to prevent the reinfection and allows the healing of periapical tissues. The use of materials that promotes an effective sealing has no achieved at the moment. The aim of this in vitro study was to develop a root canal sealer based on a glycerol salicylate resin and α-tricalcium phosphate (αTCP) that presents potential to stimulate mineral deposition. Sealers were formulated based on 70wt% of a glycerol salicylate resin, obtained by transesterification of methyl salicylate and glycerol, and 30wt% of inorganic filler, composed by calcium hydroxide and αTCP, in different proportions: 30% Ca(OH)2, 25% Ca(OH)2 + 5% αTCP, 20% Ca(OH)2 + 10% αTCP, 15% Ca(OH)2 + 15% αTCP. Synthesized resin was characterized by proton nuclear magnetic resonance spectroscopy, size exclusion chromatography and Raman spectroscopy. Sealers were characterized based on setting time, in vitro degradation over time, pH, cytotoxicity and mineral deposition. The glycerol salicylate resin was obtained by transesterification reaction, with 72% yield. Sealers presented setting time ranging from 240 min to 405 min, and basic pH over 8.21 after 28 days. Higher αTCP concentration leads to sealers with low solubility. Cell viability after 48 h in direct contact with sealers was similar to a commercial sealer (AH Plus) used as reference...

Long-term bond strength, degree of conversion and resistance to degradation of a HEMA-free model adhesive

Aim: To evaluate the long-term bond strength, degree of conversion and resistance to degradation in ethanol of HEMA-containing and HEMA-free model adhesive resins of a three-step etch-and-rinse adhesive system. Methods: The superficial dentin of 16 bovine incisor teeth was exposed, and the teeth were divided in two groups according to the HEMA concentration in the experimental adhesive (0% and 15%). In each tooth were made 6 cylindrical composite restorations. Half of the tooth restorations were submitted to microshear bond strength test after 24 h and the other half after 6 months. Degree of conversion of experimental resins was determined by Fourier transform infrared spectroscopy. Crosslink density was indirectly determined by the Knoop hardness of five specimens per group before and after immersion in ethanol for 6 h. Results: The group with 0% HEMA showed no difference in bond strength as compared to the group with 15% HEMA after 24 h or 6 months. There was no difference in degree of conversion and crosslink density between groups. Conclusions: HEMA content of the adhesive resin did not influence the bond strength to dentin, degree of conversion or resistance to degradation in ethanol.